TM 5-3805-293-23-4
0248
REMOVAL
000248
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag lines and connectors to aid in installation.
1. Disconnect line (Figure 1, Item 1) and remove O-ring (Figure 1, Item 2) from distribution block (Figure 1, Item
13). Discard O-ring.
2. Disconnect line (Figure 1, Item 7) and remove O-ring (Figure 1, Item 6) from tee (Figure 1, Item 8). Discard
O-ring.
3. Disconnect line (Figure 1, Item 9) and remove O-ring (Figure 1, Item 10) from tee (Figure 1, Item 8). Discard
O-ring.
4. Remove tiedown straps (Figure 1, Item 5) from clutch drive solenoid harness (Figure 1, Item 3).
5. Disconnect two pressure harness connectors (Figure 1, Item 4) from clutch drive solenoid harness (Figure 1,
Item 3).
6. Disconnect six harness connectors (Figure 1, Item 12) from AWD control solenoids (Figure 1, Item 11).
0248