TM 5-3805-293-23-4
0247
INSTALLATION
000247
N OT E
Install lines as tagged during removal.
Loosely install all tubes, and hand-tighten bots until tubes are fully installed on valves.
l
Loosening of fittings may be required to align tubes.
1. Install new O-ring (Figure 4, Item 13), tube (Figure 4, Item 2) four washers (Figure 4, Item 11), and bolts
(Figure 4, Item 12) on steering valve (Figure 4, Item 10).
2. Install new O-ring (Figure 4, Item 14) and connect tube (Figure 4, Item 6) to steering valve (Figure 4, Item 10).
3. Install new O-ring (Figure 4, Item 5) and connect tube (Figure 4, Item 6) to rear valve (Figure 4, Item 4).
4. Install clamp (Figure 4, Item 7), washer (Figure 4, Item 8), and bolt (Figure 4, Item 7) on rear valve bracket
(Figure 4, Item 15).
5. Install new O-ring (Figure 4, Item 3) and connect tube (Figure 4, Item 2) to rear valve (Figure 4, Item 1).
6. Tighten all loosely installed tubes and bolts.
0247-6