TM 5-3805-293-23-4
0247
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag lines to aid in installation.
5. Disconnect tube (Figure 3, Item 2) and remove O-ring (Figure 3, Item 3) from rear valve (Figure 3, Item 1).
Discard O-ring.
6. Disconnect tube (Figure 3, Item 6) and remove O-ring (Figure 3, Item 5) from tee fitting (Figure 3, Item 4).
Discard O-ring.
7. Remove bolt (Figure 3, Item 9), washer (Figure 3, Item 8), and clamp (Figure 3, Item 7) from rear valve bracket
(Figure 3, Item 15).
8. Disconnect tube (Figure 3, Item 6) and remove O-ring (Figure 3, Item 14) from steering valve (Figure 3,
Item 10). Discard O-ring.
9. Remove four bolts (Figure 3, Item 12), washers (Figure 3, Item 11), tube (Figure 3, Item 2) and O-ring
(Figure 3, Item 13) from steering valve (Figure 3, Item 10). Discard O-ring.
0247-4