TM 5-3805-293-23-4
0244
REMOVAL
000244
N OT E
Plug and cap hoses and fittings.
Tag wires to aid in installation.
Note the direction of tee fitting to aid in installation.
1. Disconnect electrical connector (Figure 1, Item 11) from front attachment wiring harness (Figure 1, Item 10).
2. Remove steering oil temperature sensor (Figure 1, Item 1), O-ring (Figure 1, Item 2), fitting (Figure 1, Item 3)
and O-ring (Figure 1, Item 4) from tee fitting (Figure 1, Item 7). Discard O-rings.
3. Disconnect steering hose (Figure 1, Item 9) from tee fitting (Figure 1, Item 7) and remove O-ring (Figure 1,
Item 8). Discard O-ring.
4. Remove tee fitting (Figure 1, Item 7) and O-ring (Figure 1, Item 6) from steering tube (Figure 1, Item 5).
Discard O-ring.
Figure 1. Temperature Sensor.
0244
END OF TASK
CLEANING
000244
Clean all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK