TM 5-3805-293-23-4
0231
ASSEMBLY CONTINUED
11. Install two new two O-rings (Figure 9, Item 5), fitting (Figure 9, Item 6) and elbow (Figure 9, Item 7) on
hydraulic fan and brake control manifold (Figure 9, Item 4).
12. Install new O-ring (Figure 9, Item 9), and wiring harness (Figure 9, Item 8) on hydraulic fan and brake control
manifold (Figure 9, Item 4). Torque to 15 lb-ft (20 Nm).
13. Install three new O-rings (Figure 9, Item 2), and check valve (Figure 9, Item 3) on hydraulic fan and brake
control manifold (Figure 9, Item 4). Torque to 30 lb-ft (40 Nm).
14. Install two new O-rings (Figure 9, Item 1), and check valve (Figure 9, Item 10) on hydraulic fan and brake
control manifold (Figure 9, Item 4). Torque to 30 lb-ft (40 Nm).
Figure 9. Check Valves and Wiring Harness.
0231
END OF TASK