TM 5-3805-293-23-4
0231
CLEANING AND INSPECTION
000231
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
ASSEMBLY
000231
1. Install two new O-rings (Figure 7, Item 10) and relief valve (Figure 7, Item 9) on hydraulic fan and brake control
manifold (Figure 7, Item 15). Torque to 30 lb-ft (40 Nm).
2. Install two new O-rings (Figure 7, Item 16) and fitting (Figure 7, Item 14) on hydraulic fan and brake control
manifold (Figure 7, Item 15).
3. Install two new O-rings (Figure 7, Item 8), fitting (Figure 7, Item 7), new O-ring (Figure 7, Item 3), fitting
(Figure 7, Item 4), new O-ring (Figure 7, Item 5), and quick disconnect (Figure 7, Item 6) on hydraulic fan and
brake control manifold (Figure 7, Item 15).
4. Install two new O-rings (Figure 7, Item 13) and fitting (Figure 7, Item 12) on hydraulic fan and brake control
manifold (Figure 7, Item 15).
5. Install two new O-rings (Figure 7, Item 11), fitting (Figure 7, Item 2) and piston pump hydraulic oil supply line
(Figure 7, Item 1) on hydraulic fan and brake control manifold (Figure 7, Item 15).
0231-9