TM 5-3805-293-23-4
0231
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
8. Disconnect pressure sensor connector (Figure 3, Item 9) from wiring harness (Figure 3, Item 8).
9. Remove two bolts (Figure 3, Item 6) and washers (Figure 3, Item 7) from hydraulic fan and brake control
manifold (Figure 3, Item 3).
10. Disconnect brake piston pump hydraulic oil supply line (Figure 3, Item 1) from brake piston pump hydraulic oil
supply line (Figure 3, Item 2).
11. Disconnect brake hydraulic oil line (Figure 3, Item 4) from hydraulic fan and brake control manifold (Figure 3,
Item 3).
12. Disconnect brake hydraulic oil line (Figure 3, Item 5) from hydraulic fan and brake control manifold (Figure 3,
Item 3).
13. Remove hydraulic fan and brake control manifold (Figure 3, Item 3) from machine.
Figure 3. Hydraulic Fan and Brake Control Manifold Sensor and Line.
0231