TM 5-3805-293-23-4
0230
DISASSEMBLY
000230
Remove two nuts (Figure 3, Item 4), bolts (Figure 3, Item 3), seals (Figure 3, Item 6), O-rings (Figure 3, Item 7),
cover (Figure 3, Item 1) and sight gauge (Figure 3, Item 5) from plate (Figure 3, Item 2). Discard seals and O-rings.
Figure 3. Sight Gauge.
0230
END OF TASK
CLEANING AND INSPECTION
000230
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
ASSEMBLY
000230
Install sight gauge (Figure 3, Item 5), cover (Figure 3, Item 1), two new O-rings (Figure 3, Item 7), new seals
(Figure 3, Item 6), bolts (Figure 3, Item 3), and nuts (Figure 3, Item 4) from plate (Figure 3, Item 2).
END OF TASK