TM 5-3805-293-23-4
0227
INSTALLATION CONTINUED
11. Install new O-ring (Figure 10, Item 2) and secondary steering sensor (Figure 10, Item 3) on implement and
steering control manifold (Figure 10, Item 1).
12. Connect secondary steering sensor pigtail connector (Figure 10, Item 6) to hydraulic valve wiring harness
(Figure 10, Item 7).
13. Connect hydraulic valve wiring harness connector (Figure 10, Item 4) to implement and steering control
manifold (Figure 10, Item 1).
14. Install new tiedown strap (Figure 10, Item 5) on hydraulic valve wiring harness (Figure 10, Item 7).
15. Install washer (Figure 10, Item 12), bolt (Figure 10, Item 13) two clamps (Figure 10, Items 8 and 11), washer
(Figure 10, Item 10), and nut (Figure 10, Item 9) on implement and steering control manifold (Figure 10,
Item 1).
0227