TM 5-3805-293-23-4
0226
REMOVAL CONTINUED
Cooling Module Panel
000226
N OT E
The procedure to remove panel and grab handles is identical for left and right. The right
rear grab handle is shown in this procedure.
1. Remove two bolts (Figure 7, Item 1) and washers (Figure 7, Item 2) from panel (Figure 7, Item 3). Open panel.
2. Remove two bolts (Figure 7, Item 4), washers (Figure 7, Item 5), and grab handle (Figure 7, Item 7) from panel
(Figure 7, Item 3).
3. Remove four nuts (Figure 7, Item 6), eight washers (Figure 7, Item 8), four bolts (Figure 7, Item 9) and panel
(Figure 7, Item 3) from engine enclosure.
4. Clean and inspect panel (refer to Cleaning and Inspection in this work package).
Figure 7. Access Door and Grab Handle.
0226
END OF TASK