TM 5-3805-293-23-4
0226
REMOVAL CONTINUED
Right Rear Access Door
000226
N OT E
Note location of washers prior toremoval to aid in installation.
Thicker washers are used on door end of door rod.
1. Remove three cotter pins (Figure 4, Item 8), washers (Figure 4, Item 6), rubber grommet (Figure 4, Item 7) and
door rod (Figure 4, Item 9) from door (Figure 4, Item 4) and access panel (Figure 4, Item 1). Discard cotter
pins.
2. Remove four bumpers (Figure 4, Item 5) from door (Figure 4, Item 1).
3. Remove five bolts (Figure 4, Item 3), washers (Figure 4, Item 2), and door (Figure 4, Item 4) from engine
enclosure.
4. Remove four bolts (Figure 4, Item 10) and washers (Figure 4, Item 11) and access panel (Figure 4, Item 1)
from engine enclosure.
5. Clean and inspect right rear access door and access panel (refer to Cleaning and Inspection in this work
package).
Figure 4. Right Rear Access Door.
0226
END OF TASK