TM 5-3805-293-23-4
0226
REMOVAL CONTINUED
Left Rear Access Door
000226
N OT E
Note location of washers prior toremoval to aid in installation.
Thicker washers are used on door end of door rod.
1. Remove three cotter pins (Figure 3, Item 8), washers (Figure 3, Item 10), rubber grommet (Figure 3, Item 9)
and door rod (Figure 3, Item 7) from door (Figure 3, Item 1) and access panel (Figure 3, Item 4). Discard cotter
pins.
2. Remove four bumpers (Figure 3, Item 11) from door (Figure 3, Item 1).
3. Remove five bolts (Figure 3, Item 3), washers (Figure 3, Item 2), and door (Figure 3, Item 1) from engine
enclosure.
4. Remove four bolts (Figure 3, Item 6), washers (Figure 3, Item 5) and access panel (Figure 3, Item 4) from
engine enclosure.
5. Clean and inspect left rear access door and access panel (refer to Cleaning and Inspection in this work
package).
Figure 3. Left Rear Access Door.
0226
END OF TASK