TM 5-3805-293-23-3
0159
REMOVAL CONTINUED
N OT E
Tag and mark hoses to aid in installation.
2. Remove clamp (Figure 2, Item 6) and disconnect hose (Figure 2, Item 10) from screen assembly (Figure 2,
Item 7).
3. Remove three bolts (Figure 2, Item 9), washers (Figure 2, Item 8), screen assembly (Figure 2, Item 7), and
O-ring (Figure 2, Item 5) from charging pump (Figure 2, Item 1). Discard O-ring.
4. Disconnect hose (Figure 2, Item 14) from elbow (Figure 2, Item 15). Remove elbow and two O-rings (Figure 2,
Item 16) from charging pump (Figure 2, Item 1). Discard O-rings.
5. Remove four bolts (Figure 2, Item 12), washers (Figure 2, Item 13), two clamps (Figure 2, Item 4), hose
(Figure 2, Item 11), O-ring (Figure 2, Item 3), spacer (Figure 2, Item 2), and O-ring (Figure 2, Item 17) from
charging pump (Figure 2, Item 1). Discard O-rings.
Figure 2. Charging Pump Hoses.
0159