TM 5-3805-293-23-3
0158
INSTALLATION
000158
1. Install transmission wiring harness (Figure 5, Item 6) on transmission.
2. Connect wiring harness plug (Figure 5, Item 9) to parking brake solenoid valve (Figure 5, Item 10).
3. Connect wiring harness plug (Figure 5, Item 8) to parking brake pressure switch (Figure 5, Item 7).
4. Install bracket (Figure 5, Item 1), two washers (Figure 5, Item 4), clips (Figure 5, Item 3) and bolts (Figure 5,
Item 2), on transmission.
5. Install new tiedown straps (Figure 5, Item 5) on transmission wiring harness (Figure 5, Item 6).
6. Connect main wiring harness connector (Figure 6, Item 8) to transmission oil temperature sensor (Figure 6,
Item 7).
7. Connect eight connector plugs (Figure 6, Item 3) to modulating valves (Figure 6, Item 2).
8. Connect main wiring harness connector (Figure 6, Item 5) to transmission wiring harness (Figure 6, Item 4).
9. Install 11 new tiedown straps (Figure 6, Item 6) on transmission wiring harness (Figure 6, Item 1).
Figure 6. Transmission Wiring Harness.
0158
