TM 5-3805-293-23-3
0147
INSTALLATION
000147
1. Install new O-ring (Figure 3, Item 13), pressure fitting (Figure 3, Item 12) and dust cap (Figure 3, Item 11), on
transmission main relief valve (Figure 3, Item 3).
N OT E
Install bolts as noted during removal.
2. Install new seal (Figure 4, Item 10) on transmission hydraulic control relief valve (Figure 4, Item 3). Install
transmission hydraulic control relief valve, five washers (Figure 4, Item 6), and bolts (Figure 4, Item 5) on trans-
mission (Figure 4, Item 4). Torque bolts to 22 lb-ft (30 Nm).
3. Install wiring harness clamp (Figure 4, Item 7), washer (Figure 4, Item 9), and bolt (Figure 4, Item 8) on
transmission hydraulic relief valve (Figure 4, Item 3). Torque bolt to 22 lb-ft (30 Nm).
4. Install wiring harness clamp (Figure 4, Item 1) and bolt (Figure 4, Item 2) on transmission hydraulic relief valve
(Figure 4, Item 3).
Figure 4. Transmission Relief Valve.
0147