TM 5-3805-293-23-3
0146
INSTALLATION CONTINUED
18. Install spring plate (Figure 14, Item 5) on transmission.
19. Install 10 washers (Figure 14, Item 4) and bolts (Figure 14, Item 3) on spring plate (Figure 14, Item 5).
20. Remove guide pins and install two washers (Figure 14, Item 7) and bolts (Figure 14, Item 6) on spring plate
(Figure 14, Item 2). Torque all twelve bolts to 74 15 lb-ft (100 20 Nm).
21. Install yoke (Figure 14, Item 1) on output shaft (Figure 14, Item 2).
Figure 14. Yoke and Spring Plate.
0146
22. Connect two harnesses (Figure 15, Item 1) to pressure sensor (Figure 15, Item 2).
Figure 15. Harness and Guard.
0146
END OF TASK
