TM 5-3805-293-23-3
0148
CLEANING AND INSPECTION
000148
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000148
N OT E
Connect wiring harness connectors as tagged during removal.
Transmission Output Speed Sensor 2
000148
1. Install new O-ring (Figure 2, Item 4) on transmission output speed sensor 2 (Figure 2, Item 3). Install
transmission output speed sensor 2 (Figure 2, Item 3) on transmission (Figure 2, Item 8).
2. Install washer (Figure 2, Item 11) and bolt (Figure 2, Item 1) on transmission output speed sensor 2 (Figure 2,
Item 3).
3. Connect wiring harness connector (Figure 2, Item 2) to transmission output speed sensor 2 (Figure 2, Item 3).
4. Install transmission guard. Refer to Transmission Guard Installation in this work package.
END OF TASK
Transmission Output Speed Sensor 1
000148
1. Install new O-ring (Figure 2, Item 7) on transmission output speed sensor 1 (Figure 2, Item 6). Install
transmission output speed sensor 1 (Figure 2, Item 6) on transmission (Figure 2, Item 8).
2. Install washer (Figure 2, Item 9) and bolt (Figure 2, Item 10) on transmission output speed sensor 1 (Figure 2,
Item 6).
N OT E
Connect wiring harness connector as tagged during removal.
3. Connect wiring harness connector (Figure 2, Item 5) to transmission output speed sensor 1 (Figure 2, Item 6).
4. Install transmission guard. Refer to Transmission Guard Installation in this work package.
END OF TASK
0148-3
