TM 5-3805-293-23-3
0147
REMOVAL CONTINUED
N OT E
Note location of bolts to aid in installation.
5. Remove bolt (Figure 3, Item 2) and wiring harness clip (Figure 3, Item 1) from transmission main relief valve
(Figure 3, Item 3).
6. Remove bolt (Figure 3, Item 8), washer (Figure 3, Item 9), and wiring harness clip (Figure 3, Item 7) from trans-
mission main relief valve (Figure 3, Item 3).
7. Remove five bolts (Figure 3, Item 5), washers (Figure 3, Item 6), transmission main relief valve (Figure 3, Item
3), and seal (Figure 3, Item 10) from transmission (Figure 3, Item 4). Discard seal.
8. Remove dust cap (Figure 3, Item 11), pressure fitting (Figure 3, Item 12) and O-ring (Figure 3, Item 13) from
transmission main relief valve (Figure 3, Item 3). Discard O-ring.
Figure 3. Transmission Hydraulic Relief Valve.
0147
END OF TASK
CLEANING AND INSPECTION
000147
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK