TM 5-3805-293-23-3
0112
INSPECTION
1. Inspect connector gasket (Figure 2, Item 5) for damage.
2. Inspect sensor electrical connector (Figure 2, Item 6) for damage.
3. Inspect sensor insulation and wires (Figure 2, Item 1) for damage.
4. Inspect sensor housing (Figure 2, Item 2) and threads (Figure 2, Item 3) for damage.
5. Inspect sensor orifice (Figure 2, Item 4) for debris and damage.
Figure 2. Sensor Inspection.
0112
END OF TASK
INSTALLATION
N OT E
Install wires as noted at removal.
1. Install new O-ring (Figure 1, Item 4) and turbocharger inlet air pressure sensor (Figure 1, Item 5) on air inlet
tube (Figure 1, Item 3).
2. Connect electrical connector (Figure 1, Item 1) on fuel wiring harness (Figure 1, Item 2).
END OF TASK
FOLLOW-ON TASKS
Connect battery cables (WP 0194).
END OF TASK
END OF WORK PACKAGE
Change 1