TM 5-3805-293-23-3
0112
REMOVAL
N OT E
Tag and mark wires to aid in installation.
1. Disconnect electrical connector (Figure 1, Item 1) from fuel wiring harness (Figure 1, Item 2).
2. Remove turbocharger inlet air pressure sensor (Figure 1, Item 5) and O-ring (Figure 1, Item 4) from air inlet
tube (Figure 1, Item 3). Discard O-ring.
Figure 1. Pressure Sensor.
0112
END OF TASK
CLEANING
Clean all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
Change 1
