TM 5-3805-293-23-3
0111
REMOVAL
000111
N OT E
Tag and mark wires to aid in installation.
1. Remove bolt (Figure 1, Item 1), washer (Figure 1, Item 2), and clamp (Figure 1, Item 3) from fuel rail (Figure 1,
Item 4). Position clamp aside.
Figure 1. Clamp.
0111
2. Slide lock tab (Figure 2, Item 5) back, and press down and disconnect electrical connector (Figure 2, Item 4)
from fuel rail pressure sensor (Figure 2, Item 3).
3. Remove fuel rail pressure sensor (Figure 2, Item 3) and O-ring (Figure 2, Item 2) from fuel rail (Figure 2,
Item 1). Discard O-ring.
Figure 2. Pressure Sensor.
0111
END OF TASK
