6
TM 5-3805-293-23-3
FIELD MAINTENANCE
-
WATER PUMP REPLACEMENT
0
082
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Tools and Special Tools
References
0
0
Tool Kit, General Mechanic's
WP 0346
0
(WP 0354, Item 83)
0
Equipment Condition
0
Wrench, Torque, Click, Ratcheting, 3/8" Drive,
Machine parked (TM 5-3805-293-10)
75 lb-ft (WP 0354, Item 95)
0
0
Coolant drained (WP 0052)
0
Materials/Parts
0
Drawings Required
Antiseize Compound (WP 0355, Item 2)
0
0
TM 5-3805-293-24P, Figure 28
Rag, Wiping (WP 0355, Item 25)
0
0
Gasket (2)
Estimated Time to Complete
0
0
1.5 Hr
0
WARN I N G
DO NOT service cooling system unless enginehas cooled escaping steam or hot coolant
will cause serious burns.
DO NOT remove cooling system cap when engne is hot. Allow engine to cool down.
i
Loosen cap to let any pressure outof cooling system, then remove cap.
Wear effective eye, hand, and skinprotection when handling coolants.
When servicing this machine, performing mainenance, or disposing of materials such as
t
engine coolant, hydraulic fluid, lubricants, battery acids or batteries, and CARC paint,
consult your unit/local hazardous waste disposal center or safety office for local regulatory
guidance. If further information is needed, please contact The Army Environmental Hotline
at 1-800-872-3845.
Failure to follow these warnings may result in injury or serious burns to personnel.
N OT E
Use a suitable container to catch coolant draining from water pump.
0082-1