4
TM 5-3805-293-23-3
FIELD MAINTENANCE
-
WATER TEMPERATURE REGULATOR REPLACEMENT
008
1
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Tools and Special Tools
References
0
0
Tool Kit, General Mechanic's
WP 0346
0
(WP 0354, Item 83)
0
Equipment Condition
0
Wrench, Torque, Click, Ratcheting,
Machine parked (TM 5-3805-293-10)
3/8" Drive, 75 lb-ft
0
Coolant drained (WP 0052)
(WP 0354, Item 95)
0
0
Materials/Parts
Drawings Required
0
0
Rag, Wiping (Item 25, WP 0355)
TM 5-3805-293-24P, Figure 27
0
0
O-ring
0
Estimated Time to Complete
0
2.0 Hr
0
WARN I N G
DO NOT service cooling system unless engine has cooled.
DO NOT remove cooling system cap when engne is hot. Allow engine to cool down.
i
Loosen cap to let any pressure outof cooling system, then remove cap.
Wear effective eye, hand, and skinprotection when handling coolants.
When servicing this machine, performing mainenance, or disposing of materials such as
t
engine coolant, hydraulic fluid, lubricants, battery acids or batteries, and CARC paint,
consult your unit/local hazardous waste disposal center or safety office for local regulatory
guidance. If further information is needed, please contact The Army Environmental Hotline
at 1-800-872-3845.
Failure to follow these warnings may result in injury or serious burns to personnel.
0081-1
Change 1
