TM 5-3805-293-23-3
0080
INSTALLATION CONTINUED
6. Connect harness connector to engine ECM (Figure 6, Item 5) and tighten bolt.
7. Connect harness connector to waste gate solenoid pigtail (Figure 6, Item 4) and slide lock tab forward.
8. Connect harness connector to fuel rail pressure sensor (Figure 6, Item 3) and slide lock tab forward.
9. Connect three harness connectors to valve cover housing (Figure 6, Item 2).
10. Connect harness connector to air pressure sensor (Figure 6, Item 6) and slide lock tab forward.
11. Connect harness connector to intake air temperature sensor (Figure 6, Item 1) and slide lock tab forward.
12. Connect harness connector to coolant temperature sensor (Figure 6, Item 7) and slide lock tab forward.
13. Install new tiedown straps on engine control wiring harness.
Figure 6. Engine Harness Connectors.
0080