TM 5-3805-293-23-3
0081
CLEANING AND INSPECTION
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
1. Position new O-ring (Figure 2, Item 2) on water temperature regulator (Figure 2, Item 3).
2. Install water temperature regulator (Figure 2, Item 3) and two bolts (Figure 2, Item 4) on cylinder head
(Figure 2, Item 1). Tighten bolts to 32.5 lb-ft (44 Nm).
3. Connect upper radiator hose (Figure 1, Item 2) and clamp (Figure 1, Item 4) to upper coolant tube (Figure 1,
Item 3). Tighten hose clamp.
4. Connect upper radiator hose (Figure 1, Item 2) and clamp (Figure 1, Item 4) to water temperature regulator
(Figure 1, Item 1). Tighten hose clamp.
END OF TASK
FOLLOW-ON TASKS
Fill engine coolant (WP 0052).
END OF TASK
END OF WORK PACKAGE
0081-3/(4 Blank)
Change 1