TM 5-3805-293-23-3
0075
INSTALLATION CONTINUED
C AU T I O N
If installing used valve bridges, ensure valve bridges are installed in original location and
orientation on cylinder head. DO NOT interchange location or orientation of valve bridges.
Failure to follow this caution may result in damage to equipment.
11. Install two valve bridges (Figure 10, Item 5) on valve springs (Figure 10, Item 6).
12. Ensure cups of pushrods (Figure 10, Item 4) are seated on ball of valve lifters. Position rocker arms (Figure 10,
Item 1) so ball of adjuster (Figure 10, Item 2) is in cup of pushrod. Finger tighten adjuster nut (Figure 10,
Item 3).
13. Adjust valve lash for rocker arm removed (WP 0032).
Figure 10. Valve Bridge.
075
Change 1
