TM 5-3805-293-23-3
0075
REMOVAL CONTINUED
C AU T I O N
Fuel injectors must be reinstalled in original location in the cylinder head. Handle fuel
injector with care. Make a temporary identification mark on the fuel injector denoting
cylinder or position. Failure to follow this caution may result in damage to equipment.
12. Pry beneath clamp (Figure 5, Item 3) to remove fuel injector (Figure 5, Item 2) and clamp from cylinder head
(Figure 5, Item 1). Discard sealing washer and fuel injector O-ring.
Figure 5. Fuel Injector.
075
END OF TASK
CLEANING AND INSPECTION
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
Change 1
