TM 5-3805-293-23-3
0060
REMOVAL CONTINUED
7. Remove four bolts (Figure 3, Item 3) and washers (Figure 3, Item 2) and disconnect hydraulic tube (Figure 3,
Item 4) from cooling fan and brake piston pump (Figure 3, Item 1).
8. Remove four capscrews (Figure 3, Item 6) and disconnect hydraulic line (Figure 3, Item 5) from cooling fan and
brake piston pump (Figure 3, Item 1).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Failure to follow this warning may result in injury or death to
personnel.
N OT E
Cooling fan and brake piston pump weigh 50 lb (23 kg).
9. With assistance, remove two bolts (Figure 3, Item 7), washers (Figure 3, Item 8), and cooling fan and brake
piston pump (Figure 3, Item 1) from transmission (Figure 3, Item 9).
Figure 3. Cooling Fan and Brake Piston Pump.
0060
END OF TASK
CLEANING AND INSPECTION
00060
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
