TM 5-3805-293-23-3
0059
REMOVAL CONTINUED
00059
N OT E
Tag and mark wires to aid in installation.
2. Disconnect electrical connector (Figure 2, Item 3) from hydraulic oil temperature sensor (Figure 2, Item 2).
3. Remove hydraulic oil temperature sensor (Figure 2, Item 2) and O-ring (Figure 2, Item 4) from fan block
(Figure 2, Item 1). Discard O-ring.
Figure 2. Temperature Sensor.
0059
END OF TASK
CLEANING AND INSPECTION
00059
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK