TM 5-3805-293-23-2
0028
Table 1. Implement Code (2146-02 to 2156-08) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2146-08 Articulation Lever
Test Step 3. Test for Open Cab
Position Sensor Abnormal
Lower Wiring Harness.
Frequency, Pulse Width or
1. Turn ignition switch and battery
Period - Continued
disconnect switch to the OFF
position.
2. Disconnect the cab lower wiring
harness connector P-C48 (WP
0009, Figure 116) from LH joy-
stick connector J3 (WP 0282).
3. Connect jumper wire between cab
lower wiring harness connector P-
C52 (WP 0009, Figure 154) termi-
nal 1 and P-C48 (WP 0009, Fig-
ure 116) terminal 3.
4. Disconnect the cab lower wiring
harness connector P-C41 (WP
0009, Figure 68) from implement
ECM J1 (WP 0009, Figure 69)
(WP 0266).
5. Disconnect the cab lower wiring
harness connector P-C39 (WP
0009, Figure 70) from implement
ECM J2 (WP 0009, Figure 71)
(WP 0266).
0028-13
