TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. LH Door Wiper Does Not
10. Turn RH door wiper/washer con- LH Door Wiper Returns to Park
Operate Properly - Con-
trol to PARK position (TM 5-3805- Position - Proceed to Test Step 15.
tinued
293-10).
LH Door Wiper Does Not Return to
Park Position - Replace LH door
wiper motor (WP 0259).
Disconnect R-C31 (WP 0009, Figure
367) from RH door wiper washer
switch (WP 0274).
Connect R-C31 (WP 0009, Figure
367) on LH door wiper washer switch
(WP 0274).
Connect R-C32 (WP 0009, Figure
363) on RH door wiper washer switch
(WP 0274).
Connect P-C74 (WP 0009, Figure
374) on LH door washer motor (WP
0261).
Inspect fuse F1. If fuse is open, install
new fuse F1 (TM 5-3805-293-10) on
fuse box.
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 11.
11. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
12. Turn left door wiper/washer con-
Left Door Wiper Does Not Work in
trol to LOW, HIGH, and PARK
One Or More Positions Or Does Not
position (TM 5-3805-293-10).
Return To Park - Repeat trouble-
shooting from beginning.
Left Door Wiper Works In Low, and
High Position, and Returns to Park
- Troubleshooting complete.
Test Step 15. Test for Shorted LH
Door Washer Motor.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-293-10).
2. Connect cab lower wiring harness
connector P-C74 (WP 0009, Fig-
ure 374) on LH door washer
motor (WP 0261).
3. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
0024-38
