TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. LH Door Wiper Does Not
3. Using digital multimeter, test for
No Continuity - Proceed to step 4.
Operate Properly - Con-
continuity between R-C1 terminal
Continuity - Replace cab upper wir-
tinued
2 and all other terminals in R-C1
ing harness (WP 0265).
(WP 0009, Figure 33).
Connect P-C74 (WP 0009, Figure
374) on LH door washer motor (WP
0261).
Install new fuse F1 on fuse box (TM 5-
3805-293-10).
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 6
4. Using digital multimeter, test for
No Continuity - Proceed to step 5.
continuity between R-C1 terminal
Continuity - Replace cab upper wir-
2 (WP 0009, Figure 33) and
ing harness (WP 0265).
machine ground.
Connect P-C74 (WP 0009, Figure
374) on LH door washer motor (WP
0261).
Install new fuse F1 on fuse box (TM 5-
3805-293-10).
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 6.
5. Using digital multimeter, test for
No Continuity - Proceed to Test Step
continuity between R-C19 termi-
12.
nal E and all other terminals in R-
Continuity - Replace cab upper wir-
C19 (WP 0009, Figure 368).
ing harness (WP 0265).
Connect P-C74 (WP 0009, Figure
374) on LH door washer motor (WP
0261).
Install new fuse F1 on fuse box (TM 5-
3805-293-10).
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 6.
6. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
0024-33
