TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. LH Door Wiper Does Not
4. Turn left door wiper/washer con-
Left Door Wiper Does Not Work in
Operate Properly - Con-
trol to LOW, HIGH, and PARK
One Or More Positions Or Does Not
tinued
position (TM 5-3805-293-10).
Return To Park - Repeat trouble-
shooting from beginning.
Left Door Wiper Works In Low, and
High Position, and Returns to Park
- Troubleshooting complete.
Test Step 20. Test 200-BK Ground
Circuit, 528-PK High Speed Circuit,
and 527-GN Low Speed Circuit for
High Resistance or Open in Wiper
Wiring Harness.
1. Disconnect wiper wiring harness
connector WK-C2 (WP 0009, Fig-
ure 370) from LH door wiper
motor (WP 0259).
2. Using digital multimeter, measure
Resistance 5.0 Ohms or Greater -
resistance between WK-C2 termi-
Replace wiper wiring harness (WP
nal 2 (WP 0009, Figure 370) and
0292).
WK-C1 terminal A (WP 0009, Fig-
Connect R-C31 (WP 0009, Figure
ure 369).
367) on LH door wiper washer switch
(WP 0274).
Proceed to step 5.
Resistance Less Than 5.0 Ohms -
Proceed to step 3.
3. Using digital multimeter, measure
Resistance 5.0 Ohms or Greater -
resistance between WK-C2 termi-
Replace wiper wiring harness (WP
nal 5 (WP 0009, Figure 370) and
0292).
WK-C1 terminal D (WP 0009, Fig-
Connect R-C31 (WP 0009, Figure
ure 369).
367) on LH door wiper washer switch
(WP 0274).
Proceed to step 5.
Resistance Less Than 5.0 Ohms -
Proceed to step 4.
0024-43