TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. LH Door Wiper Does Not
4. Turn battery disconnect switch
Operate Properly - Con-
and ignition switch to ON position
tinued
(TM 5-3805-293-10).
5. Turn left door wiper/washer con-
Left Door Wiper Does Not Work in
trol to LOW, HIGH, and PARK
One Or More Positions Or Does Not
position (TM 5-3805-293-10).
Return To Park - Repeat trouble-
shooting from beginning.
Left Door Wiper Works In Low, and
High Position, and Returns to Park
- Troubleshooting complete.
Test Step 14. Test for Shorted LH
Door Wiper Washer Switch or
Wiper Motor.
1. Install new fuse F1 on fuse box.
2. Connect cab lower wiring harness
connector P-C3 (WP 0009, Figure
34) on cab upper wiring harness
connector R-C1 (WP 0009, Figure
33) (WP 0266).
3. Connect wiper wiring harness
connector WK-C2 (WP 0009, Fig-
ure 370) on LH door wiper motor
(WP 0259).
4. Connect cab upper wiring har-
ness connector R-C19 (WP 0009,
Figure 368) on wiper harness
connector WK-C1 (WP 0009, Fig-
ure 369) (WP 0265).
5. Disconnect cab upper wiring har-
ness connector R-C32 (WP 0009,
Figure 363) from RH door wiper
washer switch (WP 0274).
6. Connect cab upper wiring har-
ness connector R-C31 (WP 0009,
Figure 367) on RH door wiper
washer switch.
7. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
0024-36
