TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2200-03 Left Steering Cylin-
Test Step 12. Test for Shorted Cab
der Position Sensor Voltage
Lower Wiring Harness to Imple-
Above Normal - Continued
ment ECM.
1. Using digital multimeter, measure
Continuity - Cab lower wiring har-
resistance between cab lower wir-
ness is open, replace cab lower wiring
ing harness connector P-C39
harness (WP 0266).
(WP 0009, Figure 70) terminal 15
Connect the steering position sensor
and all other P-C39 terminals.
harness UA-C2 (WP 0009, Figure
There should be no continuity.
192) to left steering position sensor
(WP 0009, Figure 193) (WP 0169).
Connect the rear chassis wiring har-
ness connector FA-C21 (WP 0009,
Figure 124) to transmission ECM J2
(WP 0009, Figure 112).
Connect the rear chassis wiring har-
ness connector FA-C20 (WP 0009,
Figure 113) (WP 0154) to transmis-
sion ECM J1 (WP 0009, Figure 112).
Proceed to step 2.
No Continuity - Transmission ECM
Faulty, replace transmission ECM
(WP 0137).
Connect the steering position sensor
harness UA-C2 (WP 0009, Figure
192) to left steering position sensor
(WP 0009, Figure 193) (WP 0169).
Connect the cab lower wiring harness
connector P-C39 (WP 0009, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to implement ECM J-1 (WP 0009,
Figure 69) (WP 0268).
Proceed to step 2.
2. Using the MSD (WP 0006), select
2200-03 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2200-03 is not active.
2200-03 Code Not Active - Trouble-
shooting complete.
0020-58
