TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0673-02 Transmission Out-
10.
Using digital multimeter, test for
Continuity - Replace rear chassis
put Speed Sensor #2 Data
continuity between harness con-
wiring harness (WP 0188).
Erratic, Intermittent or Incor-
nector FA-C20 (WP 0009, Figure
Connect transmission sensor wiring
rect - Continued
113) terminal 15 and all other ter-
harness connector V-C7 (WP 0009,
minals on harness connector FA-
Figure 151) to transmission output
C20 and to machine ground.
speed sensor 2 (WP 0009, Figure
There should be no continuity.
152) (WP 0148).
Proceed to step 12.
No Continuity - Proceed to step 11.
11. Using digital multimeter, test for
Continuity - Replace rear chassis
continuity between harness con-
wiring harness (WP 0188).
nector FA-C20 (WP 0009, Figure
Connect transmission sensor wiring
113) terminal 16 and all other ter-
harness connector V-C7 (WP 0009,
minals on harness connector FA-
Figure 151) to transmission output
C20 and to machine ground.
speed sensor 2 (WP 0009, Figure
There should be no continuity.
152) (WP 0148).
Proceed to step 12.
No Continuity - Replace sensor wir-
ing harness (WP 0157).
Connect harness connector FA-C20
(WP 0009, Figure 113) to transmis-
sion ECM J1 (WP 0009, Figure 112).
Proceed to step 12.
12. Using MSD (WP 0006), verify
0673-02 Code Remains Active -
0673-02 is not active.
Repeat troubleshooting from the
beginning of this diagnostic code.
0673-02 Code Not Active - Trouble-
shooting complete.
0017-109
