• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.

Maintenance Manual For Motorized Road Grader Model 120M - 1
Page Navigation
  994    995    996    997    998  999  1000    1001    1002    1003    1004  
img
. . . . . . . . . . . . . .
TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0623-04 Directional Switch
4. Monitor and record continuity with
Continuity - Replace left hand joy-
Voltage Below Normal - Con-
directional switch in the neutral
stick (WP 0282).
tinued
position (TM 5-3805-293-10).
Connect rear chassis wiring harness
There should be no continuity.
connector FA-C22 (WP 0009, Figure
47) to cab lower wiring harness con-
nector P-C69 (WP 0009, Figure 46)
(WP 0188), and install rear bulkhead
cover plate (WP 0266).
Connect harness connector FA-C21
(WP 0009, Figure 124) from transmis-
sion ECM J2 (WP 0009, Figure 112).
Proceed to step 14.
No Continuity - Proceed to step 5.
5. Monitor and record continuity with
Continuity - Replace left hand joy-
directional switch in the reverse
stick (WP 0282).
position (TM 5-3805-293-10).
Connect rear chassis wiring harness
There should be no continuity.
connector FA-C22 (WP 0009, Figure
47) to cab lower wiring harness con-
nector P-C69 (WP 0009, Figure 46)
(WP 0188), and install rear bulkhead
cover plate (WP 0266).
Connect harness connector FA-C21
(WP 0009, Figure 124) from transmis-
sion ECM J2 (WP 0009, Figure 112).
Proceed to step 14.
No Continuity - Proceed to step 6.
6. Using digital multimeter, test for
continuity between harness con-
nector P-C52 (WP 0009, Figure
154) terminal 10 and harness
connector P-C48 (WP 0009, Fig-
ure 117) terminal 3.
Continuity - Replace left hand joy-
7. Monitor and record continuity with
stick (WP 0282).
directional switch in the forward
position (TM 5-3805-293-10).
Connect rear chassis wiring harness
There should be no continuity.
connector FA-C22 (WP 0009, Figure
47) to cab lower wiring harness con-
nector P-C69 (WP 0009, Figure 46)
(WP 0188), and install rear bulkhead
cover plate (WP 0266).
Connect harness connector FA-C21
(WP 0009, Figure 124) from transmis-
sion ECM J2 (WP 0009, Figure 112).
Proceed to step 14.
No Continuity - Proceed to step 8.
0017-98


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.