TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0623-03 Directional Switch
Test Step 4. Test Joystick Return
Voltage Above Normal -
Circuit.
Continued
1. Disconnect harness connector P-
C41 (WP 0009, Figure 68) from
implement 1 ECM J1 (WP 0009,
Figure 69) (WP 0268).
2. Disconnect harness connector P-
C51 (WP 0009, Figure 118) from
left joystick J1 (WP 0009, Figure
119) (WP 0282).
3. Using digital multimeter, test for
Resistance 5.0 Ohms or Less - Pro-
continuity between harness con-
ceed to step 4.
nector P-C41 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
68) terminal 3 and harness con-
Replace cab lower wiring harness
nector P-C48 (WP 0009, Figure
(WP 0266).
116) terminal 3.
Connect harness connector FA-C21
Resistance should be less than
(WP 0009, Figure 124) to transmis-
5.0 ohms.
sion ECM J2 (WP 0009, Figure 112).
Proceed to step 7.
4. Using digital multimeter, test for
Resistance 5.0 Ohms or Less - Pro-
continuity between harness con-
ceed to step 5.
nector P-C51 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
118) terminal 3 and harness con-
Replace cab lower wiring harness
nector P-C69 (WP 0009, Figure
(WP 0266).
46) terminal 28.
Connect harness connector FA-C21
Resistance should be less than
(WP 0009, Figure 124) to transmis-
5.0 ohms.
sion ECM J2 (WP 0009, Figure 112).
Proceed to step 7.
5. Disconnect harness connector
FA-C20 (WP 0009, Figure 113)
from transmission ECM J1 (WP
0009, Figure 112) (WP 0137).
0017-93
