TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0623-03 Directional Switch
11. Monitor and record continuity with
Voltage Above Normal -
directional switch in the forward
stick (WP 0282).
Continued
position (TM 5-3805-293-10).
Connect rear chassis wiring harness
There should be no continuity.
47) to cab lower wiring harness con-
(WP 0188), and install rear bulkhead
cover plate (WP 0266).
Connect harness connector FA-C21
Proceed to step 14.
No Continuity - Proceed to step 12.
12. Monitor and record continuity with
directional switch in the neutral
stick (WP 0282).
position (TM 5-3805-293-10).
Connect rear chassis wiring harness
There should be no continuity.
47) to cab lower wiring harness con-
(WP 0188), and install rear bulkhead
cover plate (WP 0266).
Connect harness connector FA-C21
Proceed to step 14.
No Continuity - Proceed to step 13.
13. Monitor and record continuity with
directional switch in the reverse
ceed to Test Step 4.
position (TM 5-3805-293-10).
Resistance More Than 10 Ohms -
Replace left hand joystick (WP 0282).
ohms.
Connect rear chassis wiring harness
47) to cab lower wiring harness con-
(WP 0188), and install rear bulkhead
cover plate (WP 0266).
Connect harness connector FA-C21
Proceed to step 14.
0623-03 Code Active - Repeat trou-
Trans/Chassis 120M and verify
bleshooting from the beginning of this
0623-03 is active.
diagnostic code.
0623-03 Code Not Active - Trouble-
shooting complete.
0017-92