TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0596-12 Implement Control
4. Using digital multimeter, test for
Resistance 5.0 Ohms or Less - Pro-
Bad Device or Component -
continuity between harness con-
ceed to step 5.
Continued
nector FA-C22 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
47) terminal 67 and machine
Replace rear chassis wiring harness
ground.
(WP 0266).
Resistance should be less than
Connect cab lower wiring harness
5.0 ohms.
connector P-C41 (WP 0009, Figure
68) to Implement 1 ECM J1 (WP
0009, Figure 69).
Connect harness connector P-C39
(WP 0009, Figure 70) to implement 1
ECM J2 (WP 0009, Figure 69).
Proceed to step 15.
5. Using digital multimeter, test for
Resistance 5.0 Ohms or Less - Pro-
continuity between harness con-
ceed to step 6.
nector FA-C22 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
47) terminal 68 and machine
Replace rear chassis wiring harness
ground.
(WP 0266).
Resistance should be less than
Connect cab lower wiring harness
5.0 ohms.
connector P-C41 (WP 0009, Figure
68) to Implement 1 ECM J1 (WP
0009, Figure 69).
Connect harness connector P-C39
(WP 0009, Figure 70) to implement 1
ECM J2 (WP 0009, Figure 69).
Proceed to step 15.
6. Connect harness connector FA-
C22 (WP 0009, Figure 47) to har-
ness connector P-C69 (WP 0009,
Figure 46) (WP 0266).
7. Using digital multimeter, test for
Resistance 5.0 Ohms or Less - Pro-
continuity between harness con-
ceed to step 8.
nector P-C41 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
68) terminal 13 and machine
Replace cab lower wiring harness
ground.
(WP 0266).
Resistance should be less than
Proceed to step 15.
5.0 ohms.
8. Using digital multimeter, test for
Resistance 5.0 Ohms or Less - Pro-
continuity between harness con-
ceed to step 9.
nector P-C41 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
68) terminal 23 and machine
Replace cab lower wiring harness
ground.
(WP 0266).
Resistance should be less than
Proceed to step 15.
5.0 ohms.
0017-28