TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2194-08 All-Wheel Drive
3. Disconnect cab upper wiring R-
(AWD) Control Dial Position
C12 harness connector (WP
Sensor Abnormal Fre-
0009, Figure 88) from AWD con-
quency, Pulse Width, or
trol dial position sensor connector
Period - Continued
(WP 0009, Figure 89) (WP 0268).
4. Inspect cab upper wiring R-C12
Cab Upper Wiring R-C12 Harness
harness connector (WP 0009,
Connector Damaged - Replace cab
Figure 88) and AWD control dial
upper wiring harness (WP 0265).
position sensor connector (WP
Proceed to step 5.
0009, Figure 89) for damage IAW
AWD Control Dial Position Connec-
Electrical General Maintenance
tor Damaged - Replace AWD control
Procedures (WP 0347).
dial position sensor (WP 0268).
Proceed to step 5.
No Problem Found - Connect R-C12
(WP 0009, Figure 88) on AWD control
dial position sensor connector (WP
0009, Figure 89) (WP 0268).
Proceed to Test Step 2.
5. Using the MSD (WP 0006), select
2194-08 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2194-08 is not active.
2194-08 Code Not Active - Trouble-
shooting complete.
Test Step 2. Inspect Cab Upper Wir-
ing R-C1 Harness Connector and
Cab Lower Wiring Harness P-C3
Harness Connector.
1. Disconnect cab lower wiring P-
C42 harness connector (WP
0009, Figure 90) from cab upper
wiring R-C3 harness connector
(WP 0009, Figure 91) (WP 0266).
2. Disconnect cab lower wiring P-C3
harness connector (WP 0009,
Figure 34) from cab upper wiring
R-C1 harness connector (WP
0009, Figure 33) (WP 0266).
0013-124