TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2194-08 All-Wheel Drive
Test Step 8. Test G858-OR Signal
(AWD) Control Dial Position
Circuit Resistance in Cab Lower
Sensor Abnormal Fre-
Wiring Harness.
quency, Pulse Width, or
1. Disconnect cab lower wiring P-
Period - Continued
C37 harness connector (WP
0009, Figure 55) from AWD ECM
J2 (WP 0009, Figure 56) (WP
0270).
2. Using a digital multimeter, mea-
Resistance Less Than 0.3 ohm -
Replace AWD ECM (WP 0270).
sure resistance of between P-C3
terminal 53 (WP 0009, Figure 34)
Connect P-C3 (WP 0009, Figure 34)
and P-C37 terminal 26 (WP 0009,
on R-C1 (WP 0009, Figure 33) (WP
Figure 55).
0266).
Connect P-C42 (WP 0009, Figure 90)
on R-C3 (WP 0009, Figure 91) (WP
0266).
Connect R-C12 (WP 0009, Figure 88)
on AWD control dial position sensor
connector (WP 0009, Figure 89) (WP
0271).
Resistance 0.3 ohm or Greater -
Replace cab lower wiring harness
(WP 0266).
Connect R-C12 (WP 0009, Figure 88)
on AWD control dial position sensor
connector (WP 0009, Figure 89) (WP
0271).
2194-08 Code Active - Repeat trou-
3. Using the MSD (WP 0006), select
bleshooting code from the beginning.
All Wheel Drive 120M and verify
2194-08 is not active.
2194-08 Code Not Active - Trouble-
shooting complete.
0013-128