TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
N OT E
2189-06 Left All-Wheel Drive
(AWD) Clutch Reverse Sole-
Always inspect the harness connectorsthat are involved in the circuit.
noid Current Above Normal -
Poor connections can often be the cause of a problem in an electrical
Continued
circuit. Verify that all connections in the circuit are clean and secure,
and that all connections are in good condition. If a problem with a
connection is found, correct the problem and verify that this diagnostic
code is Active before performing this procedure.
Perform open or short circuit test ateach harness connection to identify
correct harness to replace.
Perform this test only if condition is Active.
Test Step 1. Test for Shorted Left
AWD Clutch Reverse Solenoid.
1. Connect MSD (WP 0006). Select
All Wheel Drive 120M and verify
2189-06 is active.
2. Turn ignition switch and battery
disconnect switch to the OFF
position.
3. Remove nose front frame cover
from machine (WP 0224).
4. Disconnect clutch drive solenoid
AF-C8 harness connector (WP
0009, Figure 82) from left AWD
clutch reverse solenoid (WP
0009, Figure 83).
5. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
6. Check for Active code 2189-05 or
Code 2189-06 Remains Active - Pro-
2189-06 in All Wheel Drive 120M
ceed to Test Step 2.
ECM (WP 0006).
Code 2189-06 Becomes Inactive
and 2189-05 Becomes Active -
Replace left AWD clutch reverse sole-
noid (WP 0248).
Proceed to step 7.
7. Using the MSD (WP 0006), select
2189-06 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2189-06 is not active.
2189-06 Code Not Active - Trouble-
shooting complete.
0013-70
