TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2189-06 Left All-Wheel Drive
Test Step 2. Test for Shorted Clutch
(AWD) Clutch Reverse Sole-
Drive Solenoid Harness.
noid Current Above Normal -
1. Turn ignition switch and battery
Continued
disconnect switch to the OFF
position.
2. Remove rear front frame cover
from machine (WP 0224).
3. Disconnect clutch drive solenoid
AF-C3 harness connector (WP
0009, Figure 51) from cab lower
wiring P-C34 harness connector
(WP 0009, Figure 52) (WP 0200).
4. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
5. Check for Active code 2189-05 or
Code 2189-06 Remains Active - Pro-
2189-06 in All Wheel Drive 120M
ceed to Test Step 3.
ECM (WP 0006).
Code 2189-06 Becomes Inactive
and 2189-05 Becomes Active -
Replace clutch drive solenoid harness
(WP 0200).
Proceed to step 6.
6. Using the MSD (WP 0006), select
2189-06 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2189-06 is not active.
2189-06 Code Not Active - Trouble-
shooting complete.
Test Step 3. Test N820-GY Left AWD
Clutch REV Sol Circuit for Short to
Other AWD Circuits in Cab Lower
Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect cab lower wiring P-
C35 harness connector (WP
0009, Figure 53) from AWD ECM
J1 (WP 0009, Figure 54) (WP
0270).
3. Disconnect cab lower wiring P-
C37 harness connector (WP
0009, Figure 55) from AWD ECM
J2 (WP 0009, Figure 56) (WP
0270).
0013-71
