TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2189-03 Left All-Wheel Drive
5. Using a digital multimeter, test for
No Continuity - Proceed to Test Step
(AWD) Clutch Reverse Sole-
continuity between P-C37 termi-
3.
noid Voltage Above Normal -
nal 3 (WP 0009, Figure 55) and all
Continuity - Replace cab lower wiring
Continued
circuits in P-C35 (WP 0009, Fig-
harness (WP 0266).
ure 53). There should be no conti-
Proceed to step 6.
nuity.
6. Using the MSD (WP 0006), select
2189-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2189-03 is not active.
2189-03 Code Not Active - Trouble-
shooting complete.
Test Step 3. Test N820-GY Left AWD
Clutch REV Sol Circuit for Short to
Other Voltage Source in Cab Lower
Wiring Harness.
1. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
Voltage Greater Than 0.3 Volts -
2. Using a digital multimeter, mea-
Replace cab lower wiring harness
sure voltage between P-C37 ter-
(WP 0266).
minal 3 (WP 0009, Figure 55) and
ground.
Proceed to step 3.
Voltage 0.3 Volts or Lower - Replace
AWD ECM (WP 0270).
Connect AF-C3 (WP 0009, Figure 51)
on P-C34 (WP 0009, Figure 52) (WP
0200).
Install rear front frame cover on
machine (WP 0224).
Proceed to step 3.
3. Using the MSD (WP 0006), select
2189-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2189-03 is not active.
2189-03 Code Not Active - Trouble-
shooting complete.
0013-65
