TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2189-06 Left All-Wheel Drive
2. Disconnect cab lower wiring P-
(AWD) Clutch Reverse Sole-
C39 harness connector (WP
noid Current Above Normal -
0009, Figure 70) from Implement
Continued
1 ECM J2 (WP 0009, Figure 71)
(WP 0268).
3. Using a digital multimeter, test for
No Continuity - Proceed to step 4.
continuity between P-C37 termi-
Continuity - Replace cab lower wiring
nal 3 (WP 0009, Figure 55) and all
harness (WP 0266).
circuits in P-C41 (WP 0009, Fig-
Connect AF-C8 (WP 0009, Figure 82)
ure 68). There should be no conti-
on left AWD clutch reverse solenoid
nuity.
(WP 0009, Figure 83).
Install nose front frame cover on
machine (WP 0224).
Proceed to step 5.
4. Using a digital multimeter, test for
No Continuity - Proceed to Test Step
continuity between P-C37 termi-
5.
nal 3 (WP 0009, Figure 55) and all
Continuity - Replace cab lower wiring
circuits in P-C39 (WP 0009, Fig-
harness (WP 0266).
ure 70). There should be no conti-
Connect AF-C8 (WP 0009, Figure 82)
nuity.
on left AWD clutch reverse solenoid
(WP 0009, Figure 83).
Install nose front frame cover on
machine (WP 0224).
Proceed to step 5.
5. Using the MSD (WP 0006), select
2189-06 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2189-06 is not active.
2189-06 Code Not Active - Trouble-
shooting complete.
Test Step 5. Test N820-GY Left AWD
Clutch REV Sol Circuit for Short to
Implement 2 Circuits in Cab Lower
Wiring Harness.
1. Disconnect cab lower wiring P-
C45 harness connector (WP
0009, Figure 72) from Implement
2 ECM J1 (WP 0009, Figure 73)
(WP 0268).
2. Disconnect cab lower wiring P-
C27 harness connector (WP
0009, Figure 74) from Implement
2 ECM J2 (WP 0009, Figure 75)
(WP 0268).
0013-73