POWER TRAIN
TM 5-3805-263-14&P
20.
21.
22.
23.
24.
25.
26.
27.
DISASSEMBLY AND ASSEMBLY
TRANSMISSION
Install the ring on cage (36). Install the cage
in the bearing for the carrier.
Put the carrier and ring gear (34) in position
over the gears in carrier (9).
Install the dowels that hold the No.3 and
No.4 clutch plates in alignment.
Install two discs (38) and one plate (39)
starting with a disc. These discs and this
plate are for the No.4 clutch.
Install springs (37) in their correct locations
in housing (22).
Install the inner and the outer ring seals on
pistons (40) and (42). Install piston (42) in
housing (41).
Put housing (41) in position over the dowels
and springs. Make sure the springs are in
their correct locations in the housing and in
piston (42). Install piston (40) in housing
(41).
Install ring gear (43) over the gears in carrier
(27). Install two discs (44) and plate (45)
on the piston starting with a disc. These
discs and this plate are for the No.5 clutch.
2-100
