POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P
TRANSMISSION
CAUTION
Be sure that the parking brake lever enters
the notch in the housing when the transmission
is put into position in the transmission case.
55. Lift the transmission with a hoist and put it
in position in the transmission case.
56. Remove the hoist and the two eyebolts.
Install the bolts that hold the transmission
in the case.
57. Install two 1/2”-13 NC forged eyebolts and
two nuts in the transmission case on top of
the output flange. Install a strap around the
transmission case and through the two
eyebolts.
58. Fasten tooling (D) to the transmission case.
Turn the transmission so it is in an up
position.
59. Put cover (7) in position on the transmis-
sion case. Put the transmission in position
on tooling (E). Install the bolts that hold
the transmission to tool (E).
60. Remove tooling (D) and the straps. Install
the sleeves in the transmission case.
2-104
