POWER TRAIN
TRANSMISSION OIL FILTER BASE
DISASSEMBLE TRANSMISSION OIL
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
FILTER BASE
start by:
a) remove transmission oil filter base
1. Remove large O-ring seal ( 1) from the inside
of the filter base.
2. Remove small O-ring seals (2) and (3) from
the filter base.
3. Remove plug (6). Remove the O-ring seal
from the plug.
4. Remove valve (5). Remove spring (4).
ASSEMBLE TRANSMISSION OIL FILTER
BASE
1. Install spring (3) in the oil filter base.
2. Put valve (2) in position in the base and
over the spring.
3. Install the O-ring seal on plug (1). Install the
plug in the base.
4. Install O-ring seal (4) in the oil filter base.
5. Install the two small O-ring seals in the
ports for inlet and outlet oil for the base.
end by:
a) install transmission oil filter base
2-63
