TANDEM HOUSINGS

BRAKE AND WHEEL SPINDLE HOUSINGS CONT. - TM-5-3805-263-14P-2_318

TM-5-3805-263-14P-2 Grader Heavy Road Motorized Type I Nonsectionalized Type II Sectionalized Manual
Page Navigation
303

POWER TRAIN DISASSEMBLY AND ASSEMBLY TM 5-3805-263-14&P-2 TANDEM HOUSINGS REMOVE TANDEM HOUSINGS Tools Needed 8S9906 Ratchet Assembly start by: A 2 1. 2. 3. 4. 5. 6. a) remove drive chains Fasten a hoist to tandem housing (2) as shown. Install tooling (A) on the brake and wheel spindle housings and the hoist. Release the air pressure from the air tank by loosening the bleed valves. WARNING: Do not disconnect the air line from the tandem housing until the air pressure is zero. Disconnect air line (1) from the junction block on the frame. Remove nuts (4) and the washers that hold tandem housing (2) to final drive housing (3). Remove tandem housing (2). Weight is 1310 lb. (594 kg). Do Steps 1 through 5 for the other tandem housing. INSTALL TANDEM HOUSINGS Tools Needed 8S9906 Ratchet Assembly A 2 1. Fasten a hoist and tooling (A) to the tandem housing. 2. Put tandem housing (1) in position on final drive housing (3). 3. Install nuts (2) and the washers that hold the tandem housing to the final drive housing. Tighten the nuts to a torque of 185 ± 10 lb. ft. (25.6 ± 1.4 mkg). 4. Remove the hoist and tooling (A) from the tandem housing. 5. Connect the air line to its correct location. 6. Do Steps 1 through 5 for the other tandem housing. end by: a) install drive chains 2-53

Privacy Statement
Press Release
Contact